Eclipse Combustion F8000 Series Service/ Instrucciones de operaciones descargar pdf (Pagina 41)

4-1

IV. MAINTENANCE

egular routine maintenance of the RICON Eclipse® F8000 (A) Series Export Use Wheelchair and

Standee Lift is required to ensure its optimum performance and reduce the need for repairs.

Maintenance inspections must be performed by an authorized Ricon dealer at least once every six

months or sooner, depending on usage. Maintenance inspections are required at least every six (6) months

and a thorough maintenance inspection should be performed at the service intervals referenced in Table [4-1].

Under conditions of excessive use (more than 10 cycles per day), service should be increased.

WARNING

THIS RICON PRODUCT IS HIGHLY SPECIALIZED. MAINTENANCE AND REPAIRS MUST BE

PERFORMED ONLY BY AN AUTHORIZED RICON DEALER USING ONLY RICON REPLACEMENT

PARTS. MODIFYING OR FAILING TO PROPERLY MAINTAIN THIS PRODUCT WILL VOID THE

WARRANTY AND MAY RESULT IN UNSAFE OPERATING CONDITIONS.

A. MAINTENANCE SCHEDULE

TABLE [4-1]: MAINTENANCE SCHEDULE

REF. SERVICE POINT DESCRIPTION

DAILY SAFETY CHECK (or @ 10 - 20 cycles of operations)

1 General

Appearance

- If any abnormal noises exist, notify an authorized dealer immediately.

- Inspect underside of vehicle to ensure nothing is out of the ordinary.

2 Lift Mountings and

Support Points

- Ensure that all lift mounting and support points are in proper order

and free from damage.

- Ensure that all mounting bolts are of appropriate grade and

sufficiently tight.

3 Carriage Stops - Ensure carriage stops fasten properly.

4 Main Lifting Pivots - Ensure carriage/lifting frame/platform pivot pins are installed prop-

erly, free from damage and locked in position with proper fasteners.

5 Platform and

Platform

Attachment Points

- Ensure platform operates properly during lift UP/DOWN functions

without obstruction(s).

- Ensure that all welds on carriage brackets, lifting frame and platform

mounting brackets are in proper order.

- Ensure that platform mounting brackets are properly fastened to both

sides of the platform with the appropriate bolts.

6 Bridge Plate and

Bridge Plate

Operation

- Ensure that bridge plate functions properly during lift UP/DOWN

operations without obstruction(s).

- Ensure that the bridgeplate deploys fully as the platform stops at the

proper vehicle floor level.

7 Rollstop and

Rollstop

Operation

- Ensure that rollstop operates properly on contact with the ground.

- Ensure that rollstop opens, closes and locks properly without

obstruction(s).

- Ensure that rollstop return springs are in proper order.

8 Handrail and

Handrail

attachment

- Ensure that all fasteners are present and properly tightened.

- Ensure that latch and load springs function properly.

BI-WEEKLY SAFETY CHECK (or @ 140 - 180 cycles of operation)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 76 77

Comentarios a estos manuales

Sin comentarios

Eclipse Combustion F8000 Series Service/ Instrucciones de operaciones Pagina 41

Comentarios a estos manuales