Eclipse Combustion F8000 Series Service/ Instrucciones de operaciones descargar pdf (Pagina 20)

2-6

f. Measure RED wire to reach circuit breaker and cut and remove any excess wire from

harness.

g. Using wire crimpers, crimp supplied terminal to end of RED harness wire and connect to

circuit breaker AUX terminal.

h. Crimp supplied terminals to both ends of previously cut 12" (30 cm) section of RED wire.

i. Connect end of 12" (30 cm) section of RED wire to circuit breaker BAT terminal.

WARNING

C WEAR PROTECTIVE CLOTHING AND EYE PROTECTION AT ALL TIMES.

BATTERIES CONTAIN ACID THAT CAN BURN. IF ACID COMES INTO CONTACT

WITH SKIN, IMMEDIATELY FLUSH AFFECTED AREA WITH WATER AND WASH

WITH SOAP.

C DO NOT SMOKE OR USE OPEN FLAME IN THE VICINITY OF BATTERY.

ALWAYS WORK IN PROPERLY VENTILATED AREA.

C DO NOT LAY ANYTHING ON TOP OF A BATTERY.

j. Connect other end of 12" (30 cm) section of RED wire to POSITIVE (+) terminal of vehicle

battery.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 76 77

Sin comentarios

Eclipse Combustion F8000 Series Service/ Instrucciones de operaciones Pagina 20