Eclipse Combustion 6500 Manual de usuario descargar pdf (Pagina 29)

Eclipse Bi-Flame v1.8, Instruction Manual 826, 05/03

Aim scanners at the third of the flame closest to the burner nozzle, as

shown at left. This is especially true for oil flames which typically have

less UV radiation in the outer flame. The scanner should view the in-

tersection of the pilot and main flames. When sighting scanners, please

consider the following:

1) Sight the scanner away from the ignition spark. Sighting the spark

or its reflections from burner internals can be misinterpreted as a

flame signal.

2) Do not allow the scanner to detect a pilot flame that is too small

to ignite the main burner.

3) Perform a minimum pilot test when installing or adjusting any pilot

or main burner system; see “Minimum Pilot Test” on page 30.

SCANNER SIGHTING

CONDITIONS

1/3 of

Flame Length

MAIN

BURNER

SCANNER

Scanner

Sight

Line

U.V. Scanner Sighting

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

Sin comentarios

Eclipse Combustion 6500 Manual de usuario Pagina 29